MIL-DTL-12883/8F
Dielectric withstanding voltage:
Sea level: Test voltage: 2,000 volts root mean square (ms). Test pin diameter
.040 + .001 inch (1.02 + .03 mm).
High altitude: Test voltage: 660 volts ms. Test pin diameter: .040 + .001 inch
(1.02 + .03 mm).
Contact resistance:
Average for all contacts: 0.015 ohm maximum.
Individual contacts: 0.03 ohm maximum.
Continuity test circuit: With the header test-gage(s) inserted into the socket(s) under test, the
pins of the test-gage(s) and the contacts of the socket(s) under test, shall result in a series
circuit. The header shall be the one used for electron tube 6AU6WB.
Mechanical:
Insertion and withdrawal force:
Initial insertion force: 15 pounds (67 newton) maximum.
Average insertion force: 12 pounds (53 newton) maximum.
Initial withdrawal force: 4 pounds (18 newton) minimum, 12 pounds (53 newton) maximum.
Vibration: The test gage shall be an approved electron-tube type 6AU6WC, in accordance with
MIL-E-1/952.
Durability: After the durability test, the withdrawal force shall be 5 pounds (22 newton) minimum.
Static load: 40 pounds (178 newton).
The part shall be designed to operate at the following conditions:
Environmental:
Operating temperature: See table I.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business