INCH-POUND
MIL-DTL-24231/18E(SH)
26 April 2013
SUPERSEDING
MIL-C-24231/18D(SH)
15 May 1987
DETAIL SPECIFICATION SHEET
CONNECTOR, PLUG, TYPE I, MOLDED, 65-CONDUCTOR
This specification is approved for use by the Naval Sea Systems Command and is available for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24231.
REQUIREMENTS:
2. The sealing plug assembly is designed to seal off the plug against hydrostatic pressure as high as
2,000 lbf/in2 and shall remain in place until assembly of the plug with the receptacle.
3. Connections of wires in cable TSP-31 to sockets shall be made in accordance with the applicable table in the
appendix of MIL-DTL-24231.
4. All dimensions are in inches.
5. Tolerances shall be as follows, or as stated:
Decimals ±0.005 inch.
a.
Fractions ±1/64 inch.
b.
Angular dimensions ±½ degree.
c.
6. These connectors are for maintenance purposes only.
7. Ni-Cu plug sleeves shall be coated with plasma spray non-conductive material in accordance with
S9320-AM-PRO-030/MLDG.
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business