INCH-POUND
MIL-DTL-24231E(SH)
26 April 2013
SUPERSEDING
MIL-C-24231D(SH)
w/AMENDMENT 2
7 August 1989
MIL-C-24231D(SH)
15 May 1987
DETAIL SPECIFICATION
CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL
INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF,
GENERAL SPECIFICATION FOR
This specification is approved for use by the Naval Sea Systems Command and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers pressure-proof single and multiple cable connectors, plugs, receptacles,
adapters, hull inserts, and hull insert plugs.
1.2 Classification. Pressure-proof fittings (connectors, plugs, receptacles, adapters, hull inserts, and hull insert
plugs) are of the following types as specified (see 6.2).
1.2.1 Types.
Type I Molded plugs (straight and 90-degree).
Type II Adapters for molded plugs.
Type III Single cable connectors.
Type IV Multiple cable connectors.
Type V Multi-pin receptacles (receptacles for multiple cable connectors).
Type VI Plugs for hull inserts.
Type VII Hull inserts.
1.3 Part or identifying number (PIN). PINs to be used for pressure-proof single and multiple cable connectors,
plugs, receptacles, adapters, hull inserts, and hull insert plugs acquired to this specification are created as follows:
M
24231
/XX
-
XXX
Prefix
Specification
Specification
Dash
Number
Sheet Number
Number
Comments, suggestions, or questions on this document should be addressed to Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business