MIL-DTL-24231E(SH)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-129
-
Military Marking for Shipment and Storage
Mechanical Vibrations of Shipboard Equipment (Type I Environmental
MIL-STD-167-1
-
and Type II Internally Excited)
MIL-STD-202
-
Electronic and Electrical Component Parts
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-454
-
General Guidelines for Electronic Equipment
(Copies of these documents are available online at https://quicksearch.dla.mil/ or https://assist.dla.mil.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9074-AQ-GIB-010/248
-
Requirements for Welding and Brazing Procedure and Performance
Qualification
S9074-AR-GIB-010/278
-
Requirements for Fabrication Welding and Inspection, and Casting
Inspection and Repair for Machinery, Piping, and Pressure Vessels
S9320-AM-PRO-020
-
Underwater Cable Assembly and Encapsulated Components,
Fabrication, Repair, and Installation Manual; Vol. II, Molding and
Inspection Procedures for Fabricating Connector Plugs for
Submarine Outboard Cables
T9074-AS-GIB-010/271
-
Requirements for Nondestructive Testing Methods
(Copies of these documents are available online at https://nll1.ahf.nmci.navy.mil. These publications can be located
by searching the Navy Publications Index for the TMIN without the suffix.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASME INTERNATIONAL
ASME B46.1
-
Surface Texture (Surface Roughness, Waviness, and Lay)
(Copies of this document are available from ASME International, 22 Law Drive, P.O. Box 2900, Fairfield, NJ
07007-2900 or online at www.asme.org.)
ASTM INTERNATIONAL
ASTM D2240
-
Standard Test Method for Rubber Property Durometer Hardness
ASTM E10
-
Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18
-
Standard Test Methods for Rockwell Hardness of Metallic Materials
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business