MIL-DTL-28748/8F
Jack and guide location: The jackscrew male (turning or fixed) or guide socket shall be located by
the A pin contact.
Contacts: In accordance with MIL-DTL-28748.
1A 100 percent size 22
1L none included 6/
1/
The number zero (0) is used to indicate which parts are not included.
2/
Polarization positions are for location of plug and receptacle shell pins and slots (see figure 2)
3/
No side clamps available with insert arrangements A, B, D, E, and F.
4/
Manufacturers, mold bodies, and hardware will not necessarily interchange with each other.
5/
These designator are informational and used for insert reference (connector size) to order an
appropriate shield or shell as a piece part. Shields and shells may be ordered together or separately.
6/ The "1L" ordering code shall be used in conjunction with insert designator zero "0" or with the insert
designators for piece part orders for which no insert is included.
Superseding information. See table I.
TABLE I. Superseding information.
Superseded documents
Dated
Superseding documents
MS14013C
28 January 1980
MIL-C-28748/8
MS14015C
28 January 1980
MS14017C
28 January 1980
MS14019C
28 January 1980
MS14021C
28 January 1980
MS14023C
28 January 1980
MS14025C
28 January 1980
MS14027C
28 January 1980
MS14071A
1 May
1986
MS14072
3 April
1978
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-28748, this document references the following:
ASTM-A582/A582M
MIL-A-8625
ASTM-B-209
MIL-DTL-28748/7
17
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business