INCH-POUND
MIL-DTL-28748D
11 June 2001
SUPERSEDING
MIL-DTL-28748C
7 July 1998
DETAIL SPECIFICATION
CONNECTOR, PLUG AND RECEPTACLE,
RECTANGULAR, RACK AND PANEL
SOLDER TYPE AND CRIMP TYPE CONTACTS
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers rectangular, rack and panel, electrical connectors, with nonremovable solder type contacts,
and removable crimp type contacts, intended for use in electronic and electrical equipment (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not
include documents cited in other sections of this specification or recommended for additional information or as examples. While
every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of
the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see
6.2).
SPECIFICATIONS
FEDERAL
QQ-P-416
-
Plating, Cadmium (Electrodeposited).
DEPARTMENT OF DEFENSE
MIL-A-8625
-
Anodic Coatings for Aluminum and Aluminum Alloys.
MIL-C-22520
-
Crimping Tools, Terminal, Hand or Power Actuated, Wire Termination, and Tool Kits, General
Specification.
MIL-W-22759
-
Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy.
MIL-C-39029
-
Contacts, Electrical Connector, General Specification.
MIL-C-39029/34
-
Contacts, Electrical Connector, Pin, Crimp Removal, (MIL-C-28748 Connectors).
MIL-C-39029/35
-
Contacts, Electrical Connector, Socket, Crimp Removal, (MIL-C-28748 Connectors).
MIL-C-39029/36
-
Contacts, Electrical Connector, Pin, Crimp Removal, (MIL-C-28748 Connectors).
MIL-C-39029/37
-
Contacts, Electrical Connector, Socket, Crimp Removal, (MIL-C-28748 Connectors).
MIL-I-81969/18
-
Installing and Removal Tools, Connector Electrical Contact, Type I, Class I, Composition C.
MIL-I-81969/20
-
Installing and Removal Tools, Connector Electrical Contact, Type I, Class I, Composition A.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this
document should be addressed to: Commander, Defense Supply Center Columbus, Attn: VAI, 3990 East Broad Street,
Columbus, Ohio, 43216-5000 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the
end of this document or by letter.
AMSC N/A
FSC 5935
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business