MIL-DTL-28748D
ELECTRONIC INDUSTRIES ASSOCIATION (EIA)
J-STD-004
-
Requirements for Soldering Fluxes.
J-STD-006
-
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for
Electronic Soldering Applications.
EIA-364-11
-
Resistance to Solvents; Test Procedure for Electrical Connectors.
EIA-364-56
-
Resistance to Soldering Heat; Test Procedure for Electrical Connectors.
EIA-557
-
Statistical Process Control Systems.
(Applications for copies should be addressed to the Electronic Industries Association, Engineering Department, 1722 Eye St. N.W.
Washington D.C. 20006.)
INTERNATIONAL STANDARD ORGANIZATION (ISO)
ISO-10012-1
-
Quality Assurance Requirements for Measuring Equipment.
(Applications for copies should be addressed to the American National Standards Institute, 11 West 42nd Street, New York, NY
10036.)
NATIONAL CONERENCE OF STANDARDS LABORATORIES (NCSL)
ANSI/NCSL 2540-1
-
Calibration Laboratories and Measuring and Test Equipment, General Requirement.
(Applications for copies should be addressed to the National Conference Standards Laboratories, 1800 30th Street, Suite 305B,
Boulder, CO 80301-1032.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
AMS-QQ-A-250/8
-
Aluminum Alloy, 5052, Plate and Sheet.
AMS-QQ-N-290
-
Nickel Plating (Electrodeposited).
AMS-QQ-P-35
-
Passivation Treatments for Corrosion-Resist Steel.
AMS-P-81728
-
Plating, Tin-Lead (Electrodeposited).
(Applications for copies should be addressed to the SAE World Headquarters, 400 Commonwealth Drive,
Warrendale, PA 15096-0001.)
(Non-Government standards and other publications are normally available from the organizations that prepare or distribute the
documents. These documents also may be available in or through libraries or other informational services.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited herein (except for
related associated specifications or specification sheets), the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the applicable
specification sheet. In the event of any conflict between the requirements of this specification and the specification sheet, the latter
shall govern.
3.2 Quality.
3.2.1 Qualification. Connectors furnished under this specification shall be products that are authorized by the qualifying activity for
listing on the applicable qualified products list before contract award (see 4.5 and 6.3).
3.3 Materials. Example reference materials are identified herein. However, when an example reference material is not identified,
a material shall be used which will enable the connectors and accessories to meet the performance requirements of this
specification. Acceptance or approval of a constituent material shall not be construed as a guaranty of acceptance of the finished
product.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business