MIL-DTL-55302/98D
REQUIREMENTS
Dimensions and configurations: See figure 1.
Material: Phosphor bronze in accordance with ASTM B139, composition A.
Plating: The contact plating shall be gold in accordance with ASTM B488, type II, code D, class 1.27, over nickel
plating in accordance with SAE-AMS-QQ-N-290, class 2, 30 to 150 microinches.
Contact separating force: See configuration A:
Polished steel gage from unplated contacts: 1 ounce minimum.
Plated gold over nickel contacts (contact to contact): 2 to 10 ounces.
Current rating, maximum: 3 amperes, 24 AWG wire.
Wire size: For .025 square wrappost, wire sizes 24, 26, 28 and 30 are recommended.
Identification of contact:
Contacts shall be permanently imprinted with manufacturer's symbol for purpose of identifying manufacturer's
product (see detail A).
Application: Contact, hermaphroditic, crimp removable for wire (stranded), are to be used with connectors
MIL-DTL-55302/95, MIL-DTL-55302/96, and MIL-DTL-55302/99.
Part or Identifying Number (PIN): M55302/98-01.
Wrappost shall be tested in accordance with the applicable connector specification sheet.
Referenced documents. In addition to MIL-DTL-55302, this document references the following:
ASTM B139
MIL-DTL-55302/95
ASTM B488
MIL-DTL-55302/96
SAE-AMS-QQ-N-290
MIL-DTL-55302/99
Previous changes. Marginal notations are not used in this revision to identify changes with respect to the previous
issue due to the extent of the changes.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business