MIL-DTL-83505/1F
REQUIREMENTS
Qualification:
Group qualification: Shall be as specified in table I.
Dimensions and configuration: Shall be in accordance with figures 1, 2, and table II.
Solderless wrappost geometry: The solderless wrappost geometry shall be in accordance with
figures 2 and 3.
TABLE I. Group qualification.
Dash number
Qualification tests
-001, -002, -009, and -010
Require all qualification tests of MIL-DTL-83505.
(as applicable)
-003 through 006 and
Visual and mechanical tests of MIL-DTL-83505
and qualification of one of the following: -001, -
-011 through -014
(as applicable)
002, -009, -010
Groups 1, 2, and 5 of qualification table of
-007 and -008
MIL-DTL-83505 and qualification of one of the
(as applicable)
following: -001, -002, -009, or -010.
TABLE II. Interface dimensions and finish.
Recommended
Accepts pin
Sleeve
Dash
mounting
plating
number
hole dia (mm)
Length
Diameter
".001 (0.03)
(mm)
(mm)
.175
.021
-001 and -009
Gold
(4.44)
(0.53)
.055
(1.40)
.125
.016
Tin/lead
-002 and -010
(3.18)
(0.41)
.021
.175
-003 and -011
Gold
(0.53)
(4.44)
.055
(1.40)
.016
.125
Tin/lead
-004 and -012
(0.41)
(3.18)
.021
.175
-005 and -013
Gold
(0.53)
(4.44)
.055
(1.40)
.016
.125
Tin/lead
-006 and -014
(0.41)
(3.18)
.030
.281
-007
Gold
(0.76)
(7.14)
.076
(1.93)
.020
.156
Tin/lead
-008
(0.51)
(3.96)
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business