MIL-DTL-83513/24D
REQUIREMENTS:
Dimensions and configurations: See figures 1, 2, and 3.
Current rating, maximum: 3 amperes per contact.
Materials:
Termination organization area: Potting fill material capable of passing the electrical and environmental
requirements of MIL-DTL-83513.
Shell: The requirements for shell materials shall be in accordance with MIL-DTL-83513.
Plastic body or plastic molding: Shall conform to the requirements of GDI-30F or type SDG-F in accordance with
ASTM D5948 or GCT-30F in accordance with ASTM D5927 or MIL-M-24519 or GST-40F in accordance with
ASTM D4067 or MIL-M-24519 or GLCP-30F or GLCP-50 in accordance with ASTM D5138 or MIL-M-24519.
Jackpost: Corrosion resistant steel in accordance with ASTM A484/A484M and ASTM A582/A582M, 300 series
stainless steel, passivated in accordance with SAE-AMS-2700, type 2.
Wire termination pins: Wire termination pins shall conform to A-A-59551, no. 24 AWG copper, except shall be tin-
lead plated with a minimum of 3 percent lead.
Mating connector: Shall conform to MIL-DTL-83513/2 and MIL-DTL-83513/4.
Plating of termination leads: Solder dipping of termination leads will be accomplished in SN60 PB40 or SN 63 PB37
in accordance with J-STD-006.
Part or Ident ifying N umber (P IN): PIN shall con sist of t he l etter M , the basic nu mber of the spe cification she et, a
letter from the insert, a numerical code for the termination length, and a letter code for the shell finish and hardware
column.
H
01
A
P
M83513/24-
Termination
Shell finish
Hardware
Specification
Insert
length
(interface critical)
sheet number
arrangements
(see figure 2)
A = Pure electrodeposited
N = No hardware or threaded insert
H = 100
01 = .109
02 = .140
aluminum
P = jackpost attach
U = 4-40 threaded insert 1/
03 = .172
C = Cadmium
Y = jackpost and 4-40 threaded
K = Zinc nickel
insert 1/
N = electroless nickel
(space applications only)
P = Passivated Stainless Steel
T = Nickel fluorocarbon
polymer
1/ "U" and "Y" designators replaced the "T" and "W" designators which are for 2-56 UNC-2B threaded insert. See table
I for supersession data.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business