MIL-DTL-83517/3A
ENGINEERING PARAMETERS
Nominal impedance: 50 ohms.
Voltage rating: 335 V rms maximum at sea level.
150 V rms maximum at 70,000 feet.
Frequency range: 0 to 18.0 GHz.
Temperature rating: -65ºC to 105ºC.
REQUIREMENTS
Design and construction: See figures 1 through 3, table I and MIL-STD-348.
Force to engage and disengage:
Torque 2 inch-pounds maximum.
Longitudinal force Not applicable.
Coupling proof torque: Not applicable.
Inspection note: For each test of threaded coupling connector where the test is performed on mated
pairs, the pairs shall be torqued to 7 to 10 inch-pounds.
Contact gaging: See figure 4.
Contacts with spring members:
Center contact (socket):
Oversize test pin - .0375 +.0001.
Test pin finish 16 microinches.
Insertion depth - .030/.045.
Number of insertions 3.
Insertion force test: Steel test pin diameter .0370 + .0001.
Insertion depth - .050/.075.
Test pin finish 16 microinches.
Insertion force 3 pounds maximum.
Withdrawal force test: Steel test pin diameter .0355 - .0001.
Insertion depth - .050/.075.
Withdrawal force 1 ounce minimum.
Test pin finish 16 microinches.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business