MIL-DTL-83517/6A
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. All undimensioned pictorial configurations are for reference purposes only.
4. Number two screws are suggested for mounting.
FIGURE 1. Series SMA, socket contact, surface launch, receptacle Continued.
ENGINEERING PARAMETERS
Nominal impedance: 50 ohms.
Voltage rating: 335 Vrms maximum at sea level.
150 Vrms maximum at 70,000 feet.
Frequency range: 0 to 12.4 GHz.
Temperature rating: -65º to 105ºC.
REQUIREMENTS:
Design and construction: See figure 1, table I and MIL-STD-348.
Force to engage and disengage:
Torque 2 inch-pounds maximum.
Longitudinal force Not applicable.
Coupling proof torque: Not applicable.
Inspection note: For each test of threaded coupling connector where the test is performed on mated
pairs, the pairs shall be torqued to 7 to 10 inch-pounds.
Contact gaging: See figure 2.
Contacts with spring members:
Center contact (socket):
Oversize test pin - .0375 +.0001.
Test pin finish 16 microinches.
Insertion depth - .030/.045.
Number of insertions 3.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business