MIL-DTL-83517/7A
Permeability of nonmagnetic materials: Applicable.
Seal:
Hermetic sealed connectors: Not applicable.
Pressurized and weatherproof connectors: Not applicable.
Insulation resistance: 5,000 megohms minimum in accordance with test procedure EIA-364-21.
Center contact retention:
Axial force: Not applicable.
Torque: Not applicable.
Dielectric withstanding voltage: In accordance with test procedure EIA-364-20, test condition I.
Test voltage 1,000 V rms.
Corrosion: In accordance with test procedure EIA-364-26, test condition B.
Voltage standing wave ratio (VSWR): 1.35 +.01F (F in GHz), maximum.
Test frequency range: From .5 to 18.0 GHz. (Using a test method approved by the qualifying
activity.)
RF transmission loss: .07√F (F in GHz) tested from 2-18 GHz.
RF leakage: Not applicable.
Connector durability:
Interface:
500 cycles minimum at 12 cycles/minute maximum rate.
Connector shall meet contact gaging and force to engage and disengage requirements.
Contact resistance: In milliohms maximum.
After environment
Initial
Center contact:
3.0
4.0
Outer contact:
2.0
Not applicable
Thermal shock: Applicable, test condition A.
Moisture resistance: Method 106 of MIL-STD-202.
No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5
minutes after removal from humidity.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business