MIL-DTL-83517-9 Connector, Receptacles, Electrical, Radio Frequency, Strip Or Microstrip Transmission Line, Series Sma \(Socket Contact, End Launch\)

Pages 1 - 2 - 3 - 4 - 5 - 6

MIL-DTL-83517/9A

NOTES:

1. Dimensions are in inches.

2. Metric equivalents are given for information only.

3. All undimensioned pictorial configurations are for reference purposes only.

4. Mounting screws shall be steel in accordance with MIL-C-83517. Number 2 screws are suggested for

mounting.

FIGURE 2. Series SMA, socket contact, end launch, receptacle (.250 inch) � Continued.

ENGINEERING PARAMETERS

Nominal impedance: 50 ohms.

Voltage rating: 600 V rms maximum at sea level, 335 V rms for M83517/9-31001 only.

150 V rms maximum at 70,000 feet.

Frequency range: 0 to 18.0 GHz.

Temperature rating: -65� to 105�C.

REQUIREMENTS

Design and construction: See figures 1 and 2, table I and MIL-STD-348.

Force to engage and disengage:

Torque � 2 inch-pounds maximum.

Longitudinal force � Not applicable.

Coupling proof torque: Not applicable.

Inspection note: For each test of threaded coupling connector where the test is performed on mated

pairs, the pairs shall be torqued to 7 to 10 inch-pounds.

Contact gaging: See figure 3.

Contacts with spring members:

Center contact (socket):

Oversize test pin - .0375 +.0001.

Test pin finish � 16 microinches.

Insertion depth - .030/.045.

Number of insertions � 3.