MIL-DTL-83517/9A
Center contact retention (excluding transition end):
Axial force: 6 pounds minimum.
Torque: 4 inch-ounces minimum.
Dielectric withstanding voltage: In accordance with test procedure EIA-364-20, test condition I.
Test voltage 1,000 V rms.
Corrosion: In accordance with test procedure EIA-364-26, test condition B.
Voltage standing wave ratio (VSWR): 1.10 +.02F (F in GHz), maximum.
Test frequency range: From .5 to 18.0 GHz. (Using a test method approved by the qualifying
activity.)
RF transmission loss: .07√F (F in GHz) tested from 2-18 GHz.
RF leakage: Not applicable.
Connector durability:
Interface:
500 cycles minimum at 12 cycles/minute maximum rate.
Connector shall meet contact gaging and force to engage and disengage requirements.
Contact resistance: In milliohms maximum.
Initial
After environment
Center contact:
3.0
4.0
Outer contact:
2.0
Not applicable
Thermal shock: Applicable, test condition A.
Moisture resistance: Method 106 of MIL-STD-202.
No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5
minutes after removal from humidity.
RF high potential withstanding voltage:
At a frequency between 5 to 7.5 MHz.
Leakage current Not applicable.
RF voltage 670 V rms.
Coupling mechanism retention force: Not applicable.
PIN: M83517/9-(dash number from table I.)
Group qualification: See table II.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business