MIL-DTL-9177C
3.5.4 Contact mating position. When jack and plug are mated the No. 1 jack contact shall engage the
No. 1 plug contact groove in such a manner as to maintain contact between the reference plane surfaces
of plug and jack (see 3.1). The points of contact between contact No. 2 and contact No. 3 of the plug and
their corresponding jack contacts shall be within 0.022 inch (0.56 mm) of the plug contact corresponding
jack contact shall be no closer than 0.032 inch (0.81 mm) from the insulation between plug contacts No. 3
and No. 4.
3.5.5 Crimp sleeve (when specified, see 3.1). Each connector shall include a crimp sleeve which is
compatible with SAE-AS22520 crimping tools for anchoring the specified electrical cable to the frame of
the jack. Anchoring shall prevent twisting, outward movement, and inward movement of the cable. The
cable retaining mechanism shall not interfere with the dressing of the conductors. Cabling instructions
including applicable SAE-AS22520 tool part numbers shall be included and shall be packaged with each
connector.
3.5.6 Spring attachment clip (when specified, see 3.1). The spring attachment clip shall enable the user
to attach the connector to his clothing or parachute harness. The spring clip assembly shall open and
close without binding, and the clip teeth shall mate. The teeth of the clip shall be dulled so that they do
not puncture or damage the clothing or parachute harness.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business