MIL-PRF-39012/24D
Inches
mm
Inches
mm
9.35
.368
.56
.022
9.53
.375
1.57
.062
9.65
.380
2.21
.087
.384
9.75
2.51
.099
.493
12.52
2.64
.104
.495
12.57
2.90
.114
.500
12.70
3.89
.153
.505
12.83
3.98
.156
12.90
.508
4.04
.159
12.95
.510
5.46
.215
.620
15.75
5.54
.218
16.00
.630
5.61
.221
NOTES:
1. Dimensions are in inches.
2. For dimensions `A', `B' and `C', see table I.
3. Dimension `B' is the largest overall diameter of the connector.
4. Metric equivalents are given for information only.
5. Orientation of the mounting flats and bayonet studs shall be within ± 3° of the orientation shown.
6. All undimensioned pictorial representations are for reference purposes only.
7. Interface shall be in accordance with MIL-STD-348, socket contact.
FIGURE 1. General configuration Continued.
TABLE I. Dash numbers and overall dimensions.
Part or Identifying Number
Inches Millimeters 2/
Panel Thickness 2/
Dim
(PIN) 1/
Minimum
Maximum
Minimum
Maximum
A
--
1.343 (34.11)
.045 (1.14) .260 (6.60)
M39012/24-X001
B
.684 (17.37) .692 (17.58)
C
.813 (20.65) .843 (21.41)
A
--
1.328 (33.73)
.045 (1.14)
.260 (6.60)
M39012/24-X002
B
.590 (14.99) .600 (15.24)
C
.650 (16.51) .730 (18.54)
1/ For cross reference of dash number to superseded PIN or type designation see table III.
2/ Dimensions are in inches. Metric equivalents are given for information only.
X
Denotes connector body plating material option. The only plating options allowable are Silver or
Nickel over brass in accordance with MIL-PRF-39012. Only connectors of the same materials shall
be mated to avoid dissimilar metal problems. CAUTION: A NICKEL PLATED BODY IS NOT FOR
USE IN APPLICATIONS WHERE PASSIVE INTERMODULATION GENERATION (PIM) MAY BE A
CONCERN (https://amphenolrf.com/simple/PIM%20Paper.pdf). Silver is the preferred plating
option.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business