MIL-PRF-39012/40J
TABLE II. Group qualification and retention testing. 1/
Group
Submission and qualification of
Qualifies the following
any of the following connectors 2/
connectors
M39012/
M39012/
I
38-X010
38-X010
40-X024
38-X011
38-X012
38-X013
40-X023
40-X024
40-X025
40-X028
II
38B0015
38B0015
40B0031
38B0016
38B0017
40B0031
40B0029
40B0035
III
38-X006
38-X006
40-X015
38-X007
38-X008
38-X018
40-X006
40-X016
40-X014
40-X022
IV
38-X501
38-X501
38-X502
38-X502
40-X501
38-X503
40-X502
40-X501
40-X502
40-X503
V
38-X503
38-X503
40-X503
40-X503
1/ If a connector manufacturer produces a connector which meets all the requirements for two or more
connector PINs (within the same series), the manufacturer may receive qualification approval for two
or more connector PINs by qualifying the one connector. It is not necessary that such connectors be
in the same group. Each connector, however, must be marked with its own appropriate PIN. For
group qualification, the connectors must be of similar design.
2/ For qualification retention, where more than one part is listed in a group in this column, data may be
supplied on any of those parts in order to retain qualification for those parts in the corresponding right-
hand column. The part does not necessarily have to be the part initially qualified.
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business