MIL-PRF-39012/81G
Swept frequency VSWR test setup:
Item 6: VSWR shall be less than 1.025 +.002F (F in GHz).
Item 16: VSWR shall be less than 1.025 +.002F (F in GHz).
Second step of VSWR checkout procedure VSWR shall be less than 1.080 +.005F (F in GHz).
Group B inspection: Use step 5, long cable method.
Qualification and group C inspection: Use step 5, long cable method.
Connector durability: 500 cycles minimum at 12 cycles per minute maximum. The connector shall
meet mating characteristics and force to engage and disengage requirements.
Contact resistance: In milliohms, maximum.
Initial
After environment
Center contact:
3.0
4.0
Outer contact:
2.0
Not applicable
Braid to body:
.5
Not applicable
NOTE: Five milliohms are permissible on passivated steel bodied connectors.
Dielectric withstanding voltage at sea level: In accordance with MIL-STD-202, method 301.
Cable group
V rms
M17/133-RG405 *
1,000
M17/130-RG402 *
1,500
* Values apply to all cable PINs on these specification sheets even if not listed.
Vibration, high frequency: In accordance with MIL-STD-202, method 204, test condition D, except the
method of mounting shall be approved by the qualifying activity. No discontinuity permitted.
Shock: In accordance with MIL-STD-202, method 213, test condition I. No discontinuity permitted.
Thermal shock: In accordance with MIL-STD-202, method 107, test condition B, except test high
temperature shall be +115°C.
Moisture resistance: In accordance with MIL-STD-202, method 106. No measurements at high
humidity. Insulation resistance shall be at least 200 megohms within 5 minutes after removal from
humidity.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business