INCH-POUND
MIL-PRF-49142B
27 October 2004
SUPERSEDING
MIL-PRF-49142A
27 November 1996
PERFORMANCE SPECIFICATION
CONNECTOR, TRIAXIAL, RADIO FREQUENCY
GENERAL SPECIFICATION FOR
This specification is approved for use by Depart-
ment and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements and tests for radio frequency (RF),
triaxial, connectors (see 6.1).
1.2 Classification. Connectors are of the following classes and Part or Identifying Number (PIN), as
specified (see 3.1).
1.2.1 Classes. The class of connectors consists of the following:
a.
Class 1: A class 1 connector is a connector which is intended to provide superior RF
performance at specified frequencies, and for which all RF characteristics are
completely defined.
b.
Class 2: A class 2 connector is intended to provide mechanical connection within an
RF circuit providing specified RF performance.
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Columbus, ATTN: VAI, P.O. Box 3990, Columbus OH 43218-3990 or email to
RFConnectors@dscc.dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business