MIL-PRF-55339/24B
Coupling proof torque: Not applicable.
Mating characteristics, series N:
Center contact (socket):
Oversize test pin dia - .074 in. (1.88 mm), min.
Insertion depth - .125 in. (3.17 mm), min.
No. of insertions 1.
Max test pin (insertion force test), series N:
Steel test pin dia - .066 in. (1.68 mm), min.
Pin finish 16 microinches (0.407 µm).
Insertion force 2 lb (8.89 N), max.
No. of insertions 1.
Min test pin (withdrawal force), series N:
Steel test pin dia - .063 in. (1.60 mm), max.
Pin finish 16 microinches (0.407 µm).
Withdrawal force 2 oz (0.56 N).
No. of withdrawals 1.
Outer contact, series BNC:
Min test ring ID - .319 in. (8.10 mm), max.
Ring finish 16 microinches (0.407 µm).
Insertion force 5 lb (22.24 N), max.
Insertion depth - .093 in. (2.36 mm), min.
No. of insertions 1.
Max test ring ID - .324 in. (8.32 mm), min.
Test ring finish 16 microinches (0.407 µm).
Insertion depth - .031 in. (0.79 mm), max.
No. of insertions 1.
Permeability: <2.0.
Seal: Hermetic Not applicable.
Pressurized Not applicable.
Weatherproof Not applicable.
Insulation resistance: 5,000 megohms, min.
VSWR: 1.35, max .5 to 4 GHz.
RF leakage (total): -55 dB, min, 2 to 3 GHz.
RF insertion loss: .1 dB, max, 3 GHz (.06 √F (GHz) dB max tested at 3 GHz).
Durability: 500 cycles minimum at 12 cycles/min, maximum. The connector shall meet the mating
characteristics and force to engage and disengage requirements.
Dielectric withstanding: Test voltage 1,500 V rms, min (sea level).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business