MIL-PRF-55339/50B
NOTES:
1. Dimensions are in inches.
2. This dimension is the largest overall diameter of the connector.
3. Metric equivalents are given for information only.
4. Panel thickness .055 (1.40 mm) minimum. .125 (3.18 mm) maximum.
5. Unless otherwise specified, tolerances are ±.005 (.13 mm) on three place decimals and ±.010
(.25 mm) on two place decimals.
6. Interfaces shall be in accordance with MIL-STD-348.
FIGURE 1. General configuration. (continued)
DESIGN AND CONSTRUCTION:
General configuration: See figure 1.
Impedance: 50 ohms, nominal.
Working voltage:
Sea level: 500 Vrms.
70,000 feet (4.437 kPa): 125 Vrms
Frequency range: 0 to 11 GHz.
Temperature range: -65º to +165ºC.
PERFORMANCE (installation torque is not applicable).
Dimensions: See figure 1 and MIL-STD-348.
Center contact retention:
Axial force: 6 lb (26.69 N) minimum.
Torque: 4 inch ounces (0.03 Nm), minimum.
Force to engage and disengage:
Longitudinal force: Not applicable.
Torque: 2 in. lb (0.22 Nm), maximum.
Mating characteristics:
Center contact (socket):
Oversize test pin diameter: .057 inch (1.45 mm), minimum.
Insertion depth: .125 inch (3.17 mm), minimum.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business