MIL-PRF-55339/50B
Number of insertions: 1.
Maximum test pin (insertion force test):
Steel test pin diameter: .054 inch (1.37 mm), minimum.
Pin finish: 16 microinches (.406 µm).
Insertion force: 2 lb (8.90 N), maximum.
Number of insertions: 1.
Minimum test pin (withdrawal force):
Steel test pin diameter: .052 inch (1.32 mm), maximum.
Pin finish: 16 microinches (.406 µm).
Withdrawal force: 2 oz (0.56 N), minimum.
Number of withdrawals: Not applicable.
Outer contact: Not applicable.
Permeability: <2.0
Seal:
Hermetic: Not applicable.
Pressurized: Not applicable.
Weatherproof: 30 psi (206.8 kPa), maximum (mounting seal).
Insulation resistance: 5,000 megohms, minimum.
VSWR: Not applicable.
RF leakage (total): Not applicable.
RF insertion loss: Not applicable.
Durability: 500 cycles minimum at 12 cycles/min maximum. The connector shall meet the mating
characteristics and force to engage and disengage requirements.
Dielectric withstanding:
Test voltage: 1,500 Vrms, minimum (sea level).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business