MIL-PRF-55339C
ASTM B124
- Copper and Copper Alloy Forging Rod, Bar, and Shapes.
ASTM B139
- Rod, Phosphor Bronze, Bar, and Shapes.
ASTM B152
- Copper Sheet, Strip, Plate, and Rolled Bar.
ASTM B194
- Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar.
ASTM B196
- Rod and Bar, Copper-Beryllium Alloy.
ASTM B197
- Wire, Alloy, Copper-Beryllium.
ASTM B488
- Gold for Engineering Uses, Electrodepositied Coatings of.
ASTM B700
- Electrodepositied Coatings of Silver for Engineering Uses.
ASTM D2116
- Molding and Extrusion Materials, FEP-Fluorocarbon.
ASTM D4894
- Polytetrafluoroethylene (PTFE), Grandular Molding and Ram Extrusion
Materials.
ASTM D4895
- Polytetrafluoroethylene (PTFE), Resin Produced from Dispersion.
(Copies of these documents are available from https://www.astm.org or ASTM International, P.O.
Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME B46.1 Surface Texture (Surface Roughness, Waviness, and Lay.
(Copies of these documents are available online at https://www.asme.org or from the ASME
International, Three Park Avenue, New York, NY 10016-5990.)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS, INC.
IEEE 287 Standard For Precision Coaxial Connectors.
(Copies of these documents are available online from https://www.corporate-
communication@ieee.org or from the IEEE Operations Center, 445 Hoes Lane, Piscataway, New
Jersey 08854-1331.)
SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)
SAE-AMS-QQ-N-290
- Nickel Plating (Electrodepositied).
SAE-AMS2700
- Steels, Passivation of Corrosion Resistant.
(Copies of these documents are available online at https://www.sae.org or from the Society of
Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheets. In the event of any conflict between
requirements of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. Adapters furnished under this specification shall be products that are authorized
by the qualifying activity for listing on the applicable qualified products list before contract award (see
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business