DETAIL SPECIFICATION SHEET
INCH-POUND
MS14054F
8 May 2013 SUPERSEDING MS14054E
26 October 2005
INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SIZE 28, CLASS L, 40 AMPS
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-22992.
Quantity |
Contact |
Size |
Socket SAE-AS39029/49 M39029- |
Pin SAE-AS39029/48 M39029- |
1 |
A |
6 |
329 |
317 |
1 |
N |
6N |
329 (see note 6) |
318 |
NOTES:
1. Dimensions are in inches. Metric equivalents are given for information only. Unless otherwise specified, tolerance is ± .002 (.05 mm).
2. Unless otherwise specified, front face of pin insert pattern is shown. Socket inserts are the reverse.
3. -02-Cable IPCEA 2-NO 8 conductor round type W.
4. -03-Cable-C0-02-HDF (2/6) 0930 in accordance with MIL-DTL-3432.
5. Mark 28-02 on 28-03 insert. Trademark and 28-( ) shall appear in available space. Contact identifying letter shall be located so as to identify relative contact.
6. Only the pin contact is lengthened and has the N (neutral) designation. The mating socket contact is the same as the power contact.
FIGURE 1. 28 volt DC two wire, -02 and -03 insert arrangements, service D.
AMSC N/A FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business