INCH-POUND
MS27266B
7 January 2009
SUPERSEDING MS27266A
17 June 2003
DETAIL SPECIFICATION SHEET
INSERT, ELECTRICAL CONNECTOR - RAMP POWER,
416/240 VOLTS, MALE
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38159.
Inches |
mm |
Inches |
mm |
Inches |
mm |
.005 .010 .015 .031 .032 .062 .093 .125 .250 .350 .375 .406 |
.127 .254 .381 .787 .813 1.575 2.362 3.175 6.350 8.890 9.525 10.319 |
.438 .562 .586 .588 .654 .664 .829 1.000 1.175 1.302 1.658 2.250 |
11.125 14.287 14.884 14.935 16.612 16.866 21.057 25.400 29.845 33.071 42.113 57.150 |
2.575 2.640 2.937 3.125 3.156 3.250 3.375 3.531 7.032 8.218 |
65.405 67.056 74.600 79.375 80.162 82.550 85.725 89.687 178.61 208.74 |
NOTES:
1. Dimensions are in inches. Metric equivalents are given for information only.
2. The procurement specification for this part is MIL-DTL-38159.
3. Material: See procurement specification.
4. Remove all sharp edges.
5. Unless otherwise specified, tolerances on decimals are ± .010 inch.
6. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
7. Referenced documents shall be of the issue in effect on date of Invitation for Bid.
8. Part or Identifying Number (PIN): MS27266-1.
9. Electrical contact. See figure 2.
10. Electrical contact. See figure 3.
FIGURE 1. Configurations and dimensions for MS27266-1.
AMSC N/A FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business