MS27741A
Step 1
c. With shields held against wire bundle, separate clamp nut from body. Flare shields outward, perpendicular to wire bundle (see step 1).
Step 2
d. Place shields in slots of body making sure shields are distributed as uniformly as possible
among the slots (spring member in clamp nut will compensate for differences in shield thickness of at least .020 inch (.508 mm) between adjacent slots). If desired, shields can be doubled to achieve more uniform thickness between adjacent slots (see step 2).
Step 3
e. Install ground lead in 2 slots of body, by looping around a body tab as shown in step 3. Connect ground lead to selected termination point.
FIGURE 2. Assembly instructions.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business