MS3110F
Shell size |
L max overall length |
Y max |
x dia min open |
v max closed |
N (see note 4) ± .010 free dia |
zz screw threads |
Yz (see note 5) Lockwashers NASM35338 or NASM35333 types |
8 |
1.922 (48.82) |
.828 (21.03) |
.234 (5.94) |
.157 (3.99) |
.125 (3.18) |
6-32 UNG |
NASM35338 - 98 or -41 NASM35333 -105 or -37 |
10 |
.891 (22.63) |
.297 (7.54) |
.187 (4.75) |
.188 (4.78) |
|||
12 |
1.016 (25.81) |
.422 (10.72) |
.281 (7.14) |
.312 (7.92) |
|||
14 |
1.161 (29.49) |
.547 (13.89) |
.325 (8.26) |
.375 (9.53) |
|||
16 |
2.047 (51.99) |
1.203 (30.56) |
.609 (15.47) |
.356 (9.04) |
.500 (12.70) |
||
18 |
2.078 (52.78) |
1.469 (37.31) |
.734 (18.64) |
.456 (11.58) |
.625 (15.88) |
8-32 UNG |
NASM35338 -B8L or -8L -99 or -42 NASM35333 -106 or -38 |
20 |
2.344 (59.54) |
.519 (13.18) |
.625 (15.88) |
||||
22 |
1.656 (42.06) |
.922 (23.42) |
.519 (13.18) |
.750 (19.05) |
|||
24 |
2.406 (61.11) |
1.750 (44.45) |
.984 (24.99) |
.657 (16.69) |
.800 (20.32) |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are in given for information only.
3. True position (TP) tolerances specified are in accordance with ASME Y14.5M.
4. Use MS3420 bushing if reduced opening is required.
5. For class F: Lockwashers may be captivated.
FIGURE 3. Receptacle, rear accessories configurations, class F - Gontinued.
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business