MS33800E
REQUIREMENTS:
Design and construction: see figures 1 and 2.
For mating connectors see MS27143 and MS27144. Material:
Shell: rubber, grade SC615, A1, C1, E3, F2 in accordance with ASTM D2000.
Terminal: brass, composition 11 on 22 temper half hard minimum in accordance with ASTM B121, ASTM B36, ASTM B16, ASTM B16M and ASTM B124.
Protective finish terminal, silver plate, type II, grade A, .0002 minimum thickness, in accordance with
ASTM B700.
Style II to be used with ribbed connector to denote polarity. Style II dimensions identical to style I except as noted.
Terminal shall be attached to component and shall withstand a full test of 100 pounds (46 kilograms). For multiple connector design, minimum cavity center distance shall be 600 inches.
When connectors are coupled, the voltage drop shall not exceed 20 millivolts when tested in a 20-volt circuit as outlined in MIL-STD-202, method 307.
When connectors are coupled, the assembly shall meet the 1000-volt requirement of the dielectric strength test outlined in MIL-STD-202, method 302.
When connectors are coupled, waterproofness shall be achieved. For guidance on waterproofness, see
MIL-HDBK-1184.
When connectors are coupled, the assembly shall meet the requirements of salt spray corrosion test outlined in MIL-STD-202, method 101 (5% saline, 200 hrs.)
Recycled, virgin and reclaimed materials: There are no requirements for the exclusive use of virgin materials; however, all materials shall be new and unused. The use of recycled or reclaimed (recovered) materials is acceptable provided that all other requirements of this document are met.
All provisions of this standard are the subjects of international standardization agreement NATO-STANAG
4040. When revision or cancellation of this standard is proposed which will effect or violate the international agreement concerned, the preparing activity will take appropriate reconciliation action through international standardization channels, including departmental standardization offices, if required.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business