MS90564H
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are +.010 (.25 mm) for three place decimals and ±.02 (.51mm) for two place decimals.
4. D clearance to accommodate screw size indicated. Clearance hole may be rounded and enlarged by the use of a drift pin.
FIGURE 1. Dimensions and configuration - Continued. REQUIREMENTS:
Design and construction: See figure 1.
Chain shall move freely on protective cap after assembly.
Chain shall be passivated stainless steel in accordance with type II, class 3, trade number 8 as specified in RR-C-271 for -1, -3 and -4, and type II, class 3, trade number 35 as specified in
RR-C-271 for -7, -9 and -11.
Chain shall be within one link of length specified. Cover finish: See MIL-DTL-22992.
Optional design chain: Chain may be reversed and a larger link provided as a reverse link to provide the necessary D clearance hole.
Part or Identifying Number (PIN) example:
MS90564 -1 N
MS number |
Dash |
Finish |
number |
see requirements) |
Supersession data:
MS PIN MS90564-3 is superseded by MS PIN MS90564-3C. MS PIN MS90564-4 is superseded by MS PIN MS90564-4C.
Qualification:
Visual and mechanical examination. Magnetic permeability.
Water immersion.
Salt spray (corrosion). Tensile.
Air leakage.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business