MIL-DTL-12883/46D
REQUIREMENTS:
Qualification:
Insulator and wire support: Diallyl phthalate, in accordance with ASTM D5948, type SDG-F, or any
glass filled thermoplastic material in accordance with ASTM D5204.
Color: Material color shall be optional providing that the color provides a contrasting background for
the blue sealing grommet/blue color bands indicating rear release contacts.
Contact: In accordance with MIL-C-39029/101 (see table I).
Grommet: Silicon rubber.
Mounting hardware: Corrosion resistant steel or steel with cadmium/chromate finish.
Design, construction and physical dimensions:
Design, construction and physical dimensions shall be as specified in figures 1, 2, 3, 4, and table I.
TABLE I. Dash number and characteristics.
Mating
Contact
Number
Contact
Dash
Polarization
relay 1/
designation
of
size
type
number
contacts
mating end
wire barrel
16
16
9
M39029/101-554
MIL-PRF-83536/21-019,
01
None
20
20
2
M39029/101-553
/21-022, /22-022
16
16
9
M39029/101-554
M6106/40-002
I
02
20
20
4
M39029/101-553
16
16
9
M39029/101-554
03
II
20
20
4
M39029/101-553
16
16
9
M39029/101-554
04
III
20
20
4
M39029/101-553
1/ Reference MIL-PRF-83536 for supersession data on MIL-PRF-6106 relays.
Test gage: A mating relay in accordance with table I shall be used as a test gauge or mating connector.
Electrical:
Insulation resistance: 1,000 megohms minimum.
Dielectric withstanding voltage:
Test voltage at sea level shall be 1,250 V rms.
Test voltage at 80,000 feet (24.4 km) shall be 500 V rms.
5