MIL-DTL-24308G
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202
- Test Methods for Electronic and Electrical Component Parts.
MIL-STD-790
- Standard Practice for Established Reliability and High Reliability Qualified Products List
(QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications.
MIL-STD-1285
- Marking of Electrical and Electronic Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094)
2.2.2 Other Government documents drawings and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues are those cited in the solicitation or contract.
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)
JSC SP-R-0022
- Vacuum Stability Requirements of Polymeric Material for Spacecraft Applications.
(Copies of these documents are available online at www.nasa.gov/centers/johnson/home/ or the NASA Johnson
Space Center 2101 NASA Parkway Houston, Texas 77058.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see
American Society for Testing and Materials (ASTM)
ASTM A342/A342M
-
Test Method for Permeability of Feebly Magnetic Materials.
ASTM B488
-
Electrodeposited Coatings of Gold for Engineering Uses.
ASTM B545
-
Electrodeposited Coatings of Tin, Standard Specification For.
ASTM B633
-
Zinc on Iron and Steel, Electrodeposited Coatings Of.
ASTM B733
-
Autocatalytic Electroless Nickel-Phosphorus Coatings on Metal.
ASTM B841
-
Standard Specification for Electrodeposited of Zinc Nickel Alloy Deposits.
ASTM E595
-
Total Mass Loss and Collected Volatile Material from Outgassing in a Vacuum
-
Environment, Condensable, Standard Test Method For.
ASTM D4067
-
Standard Classification System for Reinforced and Filled Poly(Phenylene
Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM D5927
- Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO
Test Methods.
ASTM D5948
- Molding Compounds, Thermosetting, Standard Specification For.
(Copies of these documents are available online at https://www.astm.org or to the American Society for Testing
and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.)
ELECTRONIC INDUSTRIES ASSOCIATION
- Air Leakage Test Procedure for Electrical Connectors
EIA-364-02
EIA-364-05
- Contact Insertion, Release and Removal Force Test Procedure for Electrical - Connectors
EIA-364-06
- Contact Resistance Test Procedure for Electrical Connectors
EIA-364-09
- Durability Test Procedure for Electrical Connectors and Contacts
EIA-364-10
- Fluid Immersion Test Procedure for Electrical Connectors and Sockets
- Mating and Unmating Forces Test Procedure for Electrical Connectors
EIA-364-13
- Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and
EIA-364-20
Coaxial Contacts
- Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and
EIA-364-21
Coaxial Contacts
- Maintenance Aging Test Procedure for Electrical Connectors
EIA-364-24
EIA-364-25
- Probe Damage Test Procedure for Electrical Connectors
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business