MIL-DTL-3650B
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AS8660
-
Silicone Compound NATO Code Number S-736.
SAE-AMS-H-7199 -
Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper
Alloys: Numbers C17000, C17200, C17300, C17500 and C17510.
(Applications for copies should be addressed to the Society of Automotive Engineers, Inc., 400
Commonwealth Drive, Warrendale PA, 15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet the latter shall govern.
3.2 Material. Unless otherwise specified (see 3.1), the material shall be as specified herein. However,
when a definite material is not specified, a material shall be used which will enable the connectors to
meet the performance requirements of this specification. Acceptance or approval of any constituent
material shall not be construed as a guaranty of the acceptance of the finished product.
3.2.1 Brass. Brass shall be in accordance with ASTM B16, ASTM B36, ASTM B121 or ASTM B124.
3.2.2 Copper-beryllium. Copper beryllium shall be in accordance with ASTM B194, ASTM B196 or
ASTM B197. Parts fabricated of copper beryllium shall be heat treated to condition HT after machining
and forming. Heat treatment shall be in accordance with SAE-AMS-H-7199.
3.2.3 Insulating and sealing compound. Insulating and sealing compound (see 3.3.3) shall in
accordance with SAE-AS8660.
3.2.4 Phosphor bronze. Phosphor bronze shall be in accordance with composition A of ASTM B139.
3.2.5 Dielectric materials. Dielectric materials shall be in accordance with the following:
3.2.5.1 Polyethylene. Polyethylene shall be in accordance with ASTM D4976.
3.2.5.2 Polystyrene. Polystyrene shall be in accordance with type E-2 of L-P-516.
3.2.6 Silicone rubber. Silicone rubber shall be in accordance with class 2A, grade 50 or 60, of
A-A-59588, except that the oil immersion test is not applicable.
3.2.7 Synthetic rubber. Synthetic rubber shall be in accordance with grade M4AA510B13F19 of
ASTM D2000.
3.2.8 Silver solder. Silver solder shall be in accordance with class 1 of QQ-B-654.
3.2.8.1 Flux. Flux used while silver soldering shall be in accordance with O-F-499.
3.2.9 Soft solder. Soft solder shall be in accordance with composition Sn60 of J-STD-006.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business