INCH-POUND
MIL-DTL-641F
09 September 2013
SUPERSEDING
MIL-J-641E
26 February 1979
DETAIL SPECIFICATION
JACKS, TELEPHONE
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers jacks used in telephone (including telephone switchboard consoles),
telegraph, and teletype circuits, and for connecting headsets, handsets, and microphones into communications
circuits.
1.2 Classification. Jacks will be of the types specified (see 3.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents
are those cited in the solicitation or contract (see 6.2).
FEDERAL STANDARD
FED-STD-H28/2 -
Screw-Thread Standards for Federal Services Section 2 Unified Inch
Screw Threads - UN and UNR Thread Forms.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-W-76
-
Wire and Cable, Hookup, Electrical, Insulated.
MIL-DTL-55330 -
Connectors, Preparation for Delivery of.
Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime,
Columbus, ATTN: VAI, P.O. Box 3990 East Broad Street, Columbus, Ohio 43216-5000 or email to
RFConnector@dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business