MIL-PRF-39012/31D
Withdrawal force test: Steel test pin diameter .052 inch maximum.
Withdrawal force: 2 oz. minimum.
Test pin finish: 16 microinches.
Hermetic seal: Not applicable.
Leakage: Not applicable.
Insulation resistance: Method 301 of MIL-STD-202, test condition B. 5,000 megohms minimum.
Center contact retention:
6 lbs minimum axial force.
4 inch-ounces radial torque minimum.
Corrosion (salt spray): Method 101, test condition B, MIL-STD-202.
Voltage standing wave ratio (VSWR): Not applicable.
Connector durability: 500 cycles at 12 cycles per minute maximum. The connector shall meet the
mating characteristics and force to engage and disengage requirements.
Contact resistance: In milliohms maximum.
Contact
Initial
After environment
Center contact
1.5
2.0
Outer contact
.2
Not applicable
Dielectric withstanding voltage: Method 302 of MIL-STD-202. 1,500 volts rms minimum at sea level.
Vibration, high frequency: Method 204, test condition B, MIL-STD-202.
Shock: Method 213 of MIL-STD-202, test condition I.
Thermal shock: Method 107 of MIL-STD-202, test condition B, except high temperature shall be
+200°C.
Moisture resistance: Method 106 of MIL-STD-202. No measurements at high humidity. Insulation
resistance shall be at least 200 megohms within 5 minutes after removal from humidity.
Corona level:
Voltage: 375 volts, minimum.
Altitude: 70,000 feet.
RF high potential withstanding voltage:
Voltage and frequency: 1,000 volts rms at 5 MHz.
Leakage current: Not applicable.
Cable retention force: Not applicable.
Coupling mechanism retention force: Not applicable.
RF leakage: Not applicable.
Insertion loss: Not applicable.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business