MIL-PRF-39012/5H
ENGINEERING DATA:
Nominal impedance: 50 ohms.
Frequency range: 0 to 11 GHz.
Voltage rating
1,000 volts rms maximum working voltage at sea level.
250 volts rms maximum at 70,000 feet (4.437 kPa).
Temperature rating: -65°C to +165°C.
REQUIREMENTS:
Designs and configurations: See figures 1, 2, and 3.
Force to engage and disengage:
Longitudinal force: Not applicable.
Torque: 6 inch-pounds (.68 Nm) maximum.
Coupling proof torque: 15 inch-pounds (1.69 Nm) minimum.
Inspection conditions: Coupling torque: 6 to 10 inch-pounds (.68 to 1.13 Nm).
Mating characteristics: In accordance with MIL-STD-348.
Outer contact:
Test ring ID: .316 inch (8.03 mm) maximum, 16 microinch (0.406 µm) finish.
Insertion force: 25 pounds (111.20 N) maximum when inserted a minimum of .093 (2.36 mm) inch.
Contacts with slotted members: Shall contact a .324 inch (8.23 mm) minimum diameter ring within
.031 inch (0.79 mm) of their tip ends.
Hermetic seal: Not applicable.
Leakage (pressurized connectors): Not applicable.
Insulation resistance: Method 302 of MIL-STD-202, test condition B. 5,000 megohms minimum.
Center contact retention: (Applicable to captivated-center-contact connectors only.) 15 pounds
(66.72 N) minimum axial force for all cables except RG400 and RG142; 6 pounds (26.69 N) minimum
for RG400 and RG142.
Corrosion (salt spray): Method 101 of MIL-STD-202, test condition B.
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business