MS27488N
3. Example of part or identifying number:
MS27488 - 12 -2 or -3
Dash number (intended application) Gage size
Basic part number
4. MS27488 part numbers supersede part numbers from MIL-C-81511/39, MIL-C-83723/28, MS27186, MS27187, and MS27488, revision M as follows:
a. MS27488-22-2 supersedes MS27488-22-1, M81511/39-22 and
MS27488-22.
b. MS27488-20-2 supersedes MS27488-20-1, M81511/39-20, M83723/28-20, MS27186-1, MS27187-3, and MS27488-20.
c. MS27488-16-2 supersedes M81511/39-16, M83723/28-16, MS27186-2, MS27187-1, and MS27488-16.
d. MS27488-16-3 supersedes MS27488-16-1. (MS27488-16-3 is for use in MIL-DTL-
5015 electrical connectors only. See information given in table I, MS27488-16-2 for all other applications.)
e. MS27488-12-2 supersedes M81511/39-12, M83723/28-12, MS27186-3, MS27187-2, and MS27488-12.
f. MS27488-12-3 supersedes MS27488-12-1. (MS27488-12-3 is for use with MIL-DTL-
5015 electrical connectors only. See information given in table I, MS27488-12-2 for all other applications.)
g. MS27488-8-3 supersedes MS27488-8-1, M83723/28-8, and MS27488-8.
h. MS27488-4-3 supersedes MS27488-4-1, M83723/28-4, MS27187-4, and MS27488-4.
i. MS27488-0-3 supersedes MS27488-0-1, M83723/28-0, and MS27488-0.
5. The MS27488 gage size given as part of the part number matches the connector contact size and grommet cavity size for which the corresponding end seal plug is used.
6. For design purposes, this specification sheet takes precedence over acquisition documents referenced herein.
7. Contact installing tools listed in table IV may be used for installing the seal plugs. The use of tools for seal plug sizes 12 and smaller will aid in the installation by supporting the plug during
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business