MS27488N
head first insertion. The tool rides against the shoulder on the back of the plug head during insertion rather than pushing on the tail end of the unsupported plug. The tools will not remove the seal plugs. Plugs must be removed by grasping the tail end of the plug that is left protruding outside the grommet. The tools are not recommended for seal plug sizes 8 and larger.
TABLE V. Installation tools.
Seal plug |
Tool part number |
MS27488-22-2 |
M81969/14-01 |
MS27488-20-2 |
M81969/14-11 |
MS27488-16-2 |
M81969/14-03 |
MS27488-12-2 |
M81969/14-04 |
MS27488-16-3 |
M81969/14-03 |
MS27488-12-3 |
M81969/14-04 |
8. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
9. Connector, module, and switch manufacturers, their distributors, and agents are permitted to supply MS27488, revision M sealing plugs for 12 months after the date of this revision or exhaust their inventories, whichever comes first.
CONCLUDING MATERIAL
Custodians: Preparing activity: Army - CR Navy - AS
Navy - AS
Air Force - 85 (Project 5935-2006-035)
Review activities: Army - AR, MI Navy - EC
Air Force - 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business