MS3114L
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.375 |
9.52 |
.691 |
17.55 |
1.024 |
26.01 |
1.451 |
36.86 |
.010 |
0.25 |
.384 |
9.75 |
.697 |
17.70 |
1.039 |
26.39 |
1.469 |
37.31 |
.011 |
0.28 |
.422 |
10.72 |
.717 |
18.21 |
1.066 |
27.08 |
1.484 |
37.69 |
.015 |
0.38 |
.430 |
10.92 |
.734 |
18.64 |
1.076 |
27.33 |
1.500 |
38.10 |
.016 |
0.41 |
.434 |
11.02 |
.750 |
19.05 |
1.078 |
27.38 |
1.510 |
38.35 |
.020 |
0.51 |
.446 |
11.33 |
.779 |
19.79 |
1.110 |
28.19 |
1.516 |
38.51 |
.023 |
0.58 |
.456 |
11.58 |
.798 |
20.27 |
1.123 |
28.52 |
1.531 |
38.89 |
.028 |
0.71 |
.457 |
11.61 |
.800 |
20.32 |
1.125 |
28.58 |
1.566 |
39.78 |
.031 |
0.79 |
.469 |
11.91 |
.814 |
20.68 |
1.135 |
28.83 |
1.576 |
40.03 |
.032 |
0.81 |
.479 |
12.17 |
.818 |
20.78 |
1.141 |
28.98 |
1.549 |
40.49 |
.062 |
1.57 |
.500 |
12.70 |
.828 |
21.03 |
1.149 |
29.18 |
1.610 |
40.89 |
.070 |
1.78 |
.519 |
13.18 |
.858 |
21.79 |
1.164 |
29.59 |
1.625 |
41.28 |
.117 |
2.97 |
.530 |
13.46 |
.875 |
22.22 |
1.191 |
30.25 |
1.635 |
41.53 |
.125 |
3.18 |
.540 |
13.72 |
.879 |
22.33 |
1.201 |
30.51 |
1.641 |
41.68 |
.148 |
3.75 |
.547 |
13.89 |
.885 |
22.48 |
1.203 |
30.56 |
1.656 |
42.06 |
.156 |
3.96 |
.548 |
13.92 |
.891 |
22.63 |
1.234 |
31.34 |
1.703 |
43.26 |
.187 |
4.75 |
.5625 |
14.288 |
.899 |
22.83 |
1.250 |
31.75 |
1.750 |
44.45 |
.188 |
4.78 |
.564 |
14.33 |
.901 |
22.89 |
1.260 |
32.00 |
1.766 |
44.86 |
.234 |
5.94 |
.572 |
14.53 |
.907 |
23.04 |
1.266 |
32.16 |
1.781 |
45.24 |
.250 |
6.35 |
.589 |
14.96 |
.912 |
23.16 |
1.275 |
32.39 |
1.828 |
46.43 |
.259 |
6.58 |
.608 |
15.44 |
.922 |
23.42 |
1.289 |
32.74 |
1.906 |
48.41 |
.281 |
7.14 |
.609 |
15.47 |
.942 |
23.93 |
1.316 |
33.43 |
1.954 |
49.63 |
.297 |
7.54 |
.625 |
15.88 |
.952 |
24.18 |
1.326 |
33.68 |
2.047 |
51.99 |
.312 |
7.92 |
.655 |
16.64 |
.954 |
24.23 |
1.344 |
34.14 |
2.078 |
52.78 |
.317 |
8.05 |
.657 |
16.69 |
.984 |
24.99 |
1.360 |
34.54 |
2.203 |
55.96 |
.325 |
8.26 |
.665 |
16.89 |
1.000 |
25.40 |
1.375 |
34.92 |
2.328 |
59.13 |
.329 |
8.36 |
.673 |
17.09 |
1.009 |
25.63 |
1.385 |
35.18 |
2.453 |
62.31 |
.356 |
9.04 |
.6875 |
17.462 |
1.010 |
25.65 |
1.391 |
35.33 |
||
.359 |
9.12 |
.689 |
17.50 |
1.016 |
25.81 |
1.441 |
36.60 |
||
NOTES: |
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Intermateability dimensions shall be in accordance with MIL-DTL-26482.
4. Use MS3420 bushing if reduced opening is required.
5. Lock washers may be captive.
6. Not for Air Force use. Use MS3474 in lieu of MS3114 classes E, F, and P.
7. True position (TP) tolerances specified are in accordance with ASME Y14.5M.
FIGURE 1. Dimensions and configurations for classes E, F and P - Continued.
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business