MS3114L
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.005 |
0.13 |
.250 |
6.35 |
.814 |
20.68 |
1.078 |
27.38 |
1.441 |
36.60 |
.010 |
0.25 |
.329 |
8.36 |
.818 |
20.78 |
1.094 |
27.79 |
1.451 |
36.69 |
.011 |
0.28 |
.384 |
9.75 |
.828 |
21.03 |
1.125 |
28.58 |
1.500 |
38.10 |
.015 |
0.38 |
.446 |
11.33 |
.875 |
22.22 |
1.135 |
28.83 |
1.510 |
38.35 |
.016 |
0.41 |
.457 |
11.61 |
.879 |
22.33 |
1.164 |
29.59 |
1.516 |
38.51 |
.020 |
0.51 |
.479 |
12.17 |
.885 |
22.48 |
1.191 |
30.25 |
1.566 |
39.78 |
.023 |
0.58 |
.530 |
13.46 |
.907 |
23.04 |
1.201 |
30.51 |
1.576 |
40.03 |
.028 |
0.71 |
.540 |
13.72 |
.912 |
23.16 |
1.203 |
30.56 |
1.625 |
41.28 |
.031 |
0.79 |
.5625 |
14.288 |
.942 |
23.93 |
1.250 |
31.75 |
1.635 |
41.53 |
.032 |
0.81 |
.564 |
14.33 |
.952 |
24.18 |
1.260 |
32.00 |
1.641 |
41.68 |
.033 |
0.84 |
.572 |
14.53 |
.954 |
24.23 |
1.266 |
32.16 |
1.766 |
44.86 |
.062 |
1.57 |
.655 |
16.64 |
1.000 |
25.40 |
1.289 |
32.74 |
1.828 |
46.43 |
.070 |
1.78 |
.665 |
16.89 |
1.010 |
25.65 |
1.316 |
33.43 |
1.954 |
49.63 |
.117 |
2.97 |
.6875 |
17.462 |
1.024 |
26.01 |
1.326 |
33.68 |
2.078 |
52.78 |
.125 |
3.18 |
.689 |
17.50 |
1.039 |
26.39 |
1.375 |
34.92 |
2.203 |
55.96 |
.148 |
3.75 |
.691 |
17.55 |
1.066 |
27.08 |
1.385 |
35.18 |
||
.156 |
3.96 |
.697 |
17.70 |
1.076 |
27.33 |
1.391 |
35.33 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Intermateability dimensions shall be in accordance with MIL-DTL-26482.
4. Sealing member bonded to vitreous insert.
5. Not for Air Force use. Use MS3449 in lieu of MS3114 class H.
6. True position (TP) tolerances specified are in accordance with ASME Y14.5M.
7. Inactive for new design. For new design, use MS3474 for class H.
FIGURE 2. Dimensions and configurations for class H - Continued. REQUIREMENTS:
Dimensions and configuration: See figures 1 and 2.
Connector mating: This connector mates with MS3111 and MS3116. For insert arrangement: See MIL-STD-1669.
Sealing member (class H): Bonded to vitreous insert.
Packing material shall meet the requirements of ASTM-D2000.
Finishes: A finish designator shall not be included in the PIN when finish W is required. See
MIL-DTL-26482 for alternative finishes D, T and Z for classes E, F and P. Material and finish (class H only): See figure 2.
14
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business