INCH-POUND
MIL-DTL-24231/30A(SH)
26 April 2013
SUPERSEDING
MIL-C-24231/30(SH)
18 February 1992
DETAIL SPECIFICATION SHEET
CONNECTOR, PLUG, GLASS REINFORCED POLYMER, TYPE I,
MOLDED, THREE- AND FOUR-CONDUCTOR
This specification is approved for use by the Naval Sea Systems Command and is available for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24231.
REQUIREMENTS:
2. See table for cable types for molded plugs in MIL-DTL-24231.
3. All dimensions are in inches.
4. Tolerances shall be as follows, or as stated:
Decimals ±0.005 inch.
a.
Fractions ±1/64 inch.
b.
Angular dimensions ±½ degree.
c.
5. Outside diameter may vary slightly after machine clean-up when 2-inch bar stock is used.
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business