INCH-POUND
MIL-DTL-26518C
19 July 2000
SUPERSEDING
MIL-C-26518B (USAF)
27 January 1961
DETAIL SPECIFICATION
CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL
ENVIRONMENT RESISTANT, 200°C AMBIENT TEMPERATURE
GENERAL SPECIFICATION FOR
Inactive for new design after 22 April 1988. For new design use MIL-DTL-83733.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This detail specification covers the general requirements for rectangular environment-resisting miniature rack and
panel type electrical connectors (plug and receptacle, intended for use in electronic and electrical equipment (see 6.1 for restrictions
on intended use and application)).
1.2 Classification.
1.2.1 Classes:
R
-
Environment resistant.
H
-
Hermetic.
Styles
P
-
Inserts containing pin contacts.
S
-
inserts containing socket contacts.
Sizes. Shell sizes A, B, C, and D.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not
include documents cited in other sections of this specification or recommended for additional information or as examples. While
every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of
the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see
6.2).
SPECIFICATIONS
FEDERAL
QQ-A-367 -
Aluminum Alloy Forgings.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Defense Supply Center Columbus, ATTN: DSCC-VAI,
3990 East Broad Street, Columbus, OH 43216-5000, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5935
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business