MIL-DTL-26518C
DEPARTMENT OF DEFENSE
MIL-A-8625
-
Anodic Coatings, for Aluminum and Aluminum Alloys.
MIL-PRF-23699
-
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, Mato Code Number O-156.
MIL-W-22759
-
Wire, Electric, Fluoropolymer-Insulated, Copper or Copper Alloy.
MIL-DTL-27500
-
Cable, Electrical, Shielded and Unshielded, Aerospace.
MIL-C-39029
-
Contacts, Electrical Connector, General Specification For.
MIL-C-39029/31
-
Contacts, Electrical Connector, Pin, Crimp Removable, (For MIL-C-26482 Series 1, MIL-C-26500, and
MIL-C-26518).
MIL-C-39029/32 -
Contacts, Electrical Connector, Socket, Crimp Removable, (For MIL-C-26482 Series 1, MIL-C-26500,
and MIL-C-26518).
MIL-C-39029/54 -
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, (For MIL-C-26500 (USAF), and MIL-
C-26518 (USAF) Connectors).
MIL-C-39029/55 -
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, (For MIL-C-26500 (USAF), and
MIL-C-26518 (USAF) Connectors).
MIL-I-81969/17
-
Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C.
MIL-I-81969/19
-
Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition C.
STANDARDS
MIL-STD-202
-
Test Methods for Electronic and Electrical Component Parts.
MIL-STD-889
-
Dissimilar Metals.
MIL-STD-1285
-
Marking of Electrical and Electronic Parts.
MIL-STD-1344
-
Test Methods for Electrical Connectors.
MS24287
-
Mated Assembly, Connector, Rack and Panel, Miniature.
MS27488
-
Plug, End Seal, Electrical Connector.
(See supplement 1 for list of associated specification sheets and military standards).
(Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the
Defense Printing Service Detachment office, Building 4D, Customer Service, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of the documents which are DoD adopted are those listed the issue of the DoDISS cited in the
solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in
the solicitation (see 6.2).
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME B46.1
-
Surface Texture (Surface Roughness, Waviness, and Lay).
(Application for copies should be addressed to the American Society of Mechanical Engineers, 11 West 42nd street, 13th floor, New
York 10017.)
AMERICAN SOCIETY FOR TESTING AND MATERIAL (ASTM)
ASTM A342
-
Standard Test Methods for Permeability of Feebly Magnetic Materials.
ASTM B85
-
Standard Specification for Aluminum Alloy Die Castings.
ASTM D495
-
Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation.
ASTM D5948
-
Standard Specification for Molding Compounds, Thermosetting.
(Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA
19103-1187.)
International Standards Organizations (ISO)
ISO-10012-1
-
Quality Assurance Requirements for Measuring Equipment.
(Application for copies should be addressed to the International Organization for Standardization, Case Postale 56, CH-1211,
Geneve 20, Switzerland).
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business