MIL-DTL-27434B
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of the documents are those cited in the
solicitation or contract.
ASTM INTERNATIONAL
ASTM B16 -
Rod, Brass, Free-Cutting, Bar and Shapes For Use in Screw Machines
ASTM B36 -
Brass Plate, Sheet, Strip and Rolled Bar
ASTM B121 -
Leaded Brass Plate, Sheet, Strip and Rolled Bar
ASTM B124 -
Copper and Copper Alloy Forging Rod, Bar and Shapes
ASTM B139 -
Phosphor Bronze Rod, Bar and Shapes
ASTM B194 -
Copper Beryllium Alloy Plate, Sheet, Strip and Rolled Bar
ASTM B196 -
Copper Beryllium Alloy Rod and Bar
ASTM B197 -
Copper Beryllium Alloy Wire
ASTM B700 -
Electrodeposited Coatings of Silver for Engineering Uses.
ASTM D1710 -
Tubing, Extruded and Compression Molded, Polytetrafluoroethylene (PTFE) Rod
and Heavy Walled
ASTM D2000 -
Rubber Products in Automotive Applications
(Copies of these documents are available from www.astm.org or ASTM International 100 Barr Harbor
Dr., West Conshohocken, PA 19428.)
INSTITUTE FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS
J-STD-006
Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders For
Electronic Soldering Applications, Requirements For
(Applications for copies should be addressed to the Institute for Interconnecting and Packaging
Electronic Circuits, 2215 Sanders Road, Northbrook, IL 60062.)
SAE INTERNATIONAL
SAE-AMS-H-7199
- Heat Treatment of Wrought Copper-Beryllium Alloys, Process For
(Copper Alloys: Numbers C17000, C17200, C17300, C17500 and
C17510)
(Copies of these documents are available from www.sae.org or SAE International, 400 Commonwealth
Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related associated specifications or specification sheets), the text of
this document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of conflict between the requirements and
of this specification and the specification sheet, the latter shall govern.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business