MIL-DTL-27599 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification ForThis specification covers two series of miniature, high density, quick disconnect, bayonet coupling, circular, environment resistant, electrical connectors capable of continuous operation within a temperature range of -65 Degrees C to +175 Degrees C \(see 6.1\). These connectors are intermateable with applicable series I and series II connectors of MIL-DTL-38999. These connectors are supplied under a MIL-STD-790 reliability assurance program. See 6.1 for restrictions on intended use and applications.

Pages 1 - - 4 - 5 - 6 - 7 - 8|||9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22|||

MIL-DTL-27599D

d. Samples provided in 4.4.1d shall be subjected to the tests of group 4, table IV in the

sequence indicated.

4.4.3.1 Failures. One or more failures shall be cause for refusal to grant qualification.

4.4.4 Retention of qualification. To retain qualification, the contractor shall forward a report at least

every 12 months to the qualifying activity. The qualifying activity shall establish the reporting date. The

report shall consist of:

a. A summary of the results of tests performed for group B inspection indicating as a minimum,

the number of lots that have passed and the number that have failed. The results of tests of

all reworked lots shall be identified and accounted for.

b. A summary of the results of tests performed for group C inspection including the number and

mode of failures. The summary shall include results of all group B inspection tests performed

and completed during the reporting period. If the summary of the test results indicates

nonconformance with specification requirements, and corrective action acceptable to the

qualifying activity has not been taken, action may be taken to remove the failing product from

the qualified products list. Failure to submit the report within 30 days after the end of each

reporting period may result in loss of qualification for the product. In addition to the periodic

submission of inspection data, the contractor shall immediately notify the qualifying activity if

at any time during the reporting period that the inspection data indicates failure of the

qualified product to meet the requirements of this specification.

In the event that no production occurred during the 12 month reporting period, a report shall be submitted

certifying that the company still has the capabilities and facilities necessary to produce the item. If during

two consecutive reporting periods there has been no production, the manufacturer may be required, at

the discretion of the qualifying activity, to submit the products (a representative product of each

connector) to testing in accordance with the qualification inspection requirements.