MIL-DTL-55116D
1.4 Part or Identifying Number (PIN). The connector PIN will be designated in the following manner:
M55116/XX-X
The letter "M" followed by the
basic specification number.
Cable size designator (0 thru 5) in
accordance with table I.
Specification sheet number.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbook. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract (see 6.2).
FEDERAL SPECIFICATIONS
FED-STD-H28
-
Screw-Thread Standards for Federal Services
L-P-410
-
Plastic, Polyamide (nylon), Rigid: Rods, Tubes, Flats, Molded and Cast
Parts
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-28800
-
Test Equipment for use with Electrical and Electronic Equipment,
General Specification
MIL-DTL-13924
-
Coating, Oxide, Black, for Ferrous Metals
MIL-DTL-14072
-
Finishes for Ground Signal Equipment.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202
-
Test Method Standard, Electronic and Electrical Component Parts
MIL-STD-889
-
Dissimilar Metals
MIL-STD-13231
-
Marking of Electronic Items
(See supplement 1 for list of specification sheets.)
(Copies of these documents are available online at https://assist.dla.mil/ or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA, 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract (see 6.2).
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business