MIL-DTL-55116D
AMERICAN SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE AMS 5639
-
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings
SAE AMS-QQ-N-290
-
Nickel Plating (Electrodeposited)
SAE AMS-QQ-S-763
-
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
SAE AMS2700
-
Passivation Treatment for Corrosion-Resistant Steel
(Application for copies should be addressed to the American Society of Automotive Engineers, 400
Commonwealth Drive, Warrendale, PA 15096-0001, or via the internet at https://www.sae.org.)
ASTM INTERNATIONAL
ASTM A313/A313M -
Chromium-Nickel Stainless and Heat-Resisting Steel Wire
ASTM A582A852M -
Free Machining Stainless and Heat-Resisting Steel Wire
ASTM B16/B16M -
Rod, Brass, Free-cutting, Bar and Shapes for Use in Screw Machines
ASTM B194
-
Copper Beryllium Alloy Plate, Sheet, Strip and Bar
ASTM B196/B196M -
Rod and Bar, Copper-Beryllium Alloy
ASTM B197/B197M -
Wire, Alloy Copper-Beryllium
ASTM B488
-
Electrodeposited Coatings of Gold for Engineering Uses
ASTM D2000
-
Standard Classification System for Rubber Products in Automotive
Applications
ASTM D5948
-
Compounds, Molding, Thermosetting
ASTM D6779
-
Nylon Injection and Extrusion Materials (PA), Standard Classification
Systems for
(Application for copies should be addressed to the ASTM International, PO Box C700, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959, or via the internet at https://www.astm.org.)
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
ECA/EIA-364-31
-
Humidity Test Procedure for Electrical Connectors and Sockets
(Application for copies should be addressed to the Electronic Industries Alliance, Technology Standards
and Strategy Department, 2500 Wilson Boulevard, Arlington, VA 22201, or via the internet at
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 10012
-
Measurement Management Systems - Requirements for
Measurement Processes and Measuring Equipment
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein (except for related specification
sheets), the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheets. In the event of any conflict between the
requirements of this specification and the specification sheets, the latter shall govern.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business