MIL-DTL-83503C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended of for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified requirements
of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-H28 -
Screw-Thread Standard for Federal Services
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-M-24519 -
Molding Plastics and Molded Plastic Parts, Thermosetting
MIL-DTL-49055 -
Cable, Electrical, (Flexible, Flat, Unshielded), (Round Conductor) General
Specification for
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202 -
Tests Methods for Electronic and Electrical Component Parts
MIL-STD-889 -
Dissimilar Metals
MIL-STD-1285 -
Marking of Electrical and Electronic Parts
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM International
ASTM A240/A240M -
Standard Specification for Heat-Resisting Chromium and Chromium-Nickel
Stainless Steel Plate, Sheet, and Strip for Pressure Vessels
ASTM A582/A582M -
Free-machining Stainless and Heat-resisting Steel Bars, Hot-rolled or Gold
finished
ASTM A666
-
Standard Specification for Annealed or Cold-Worked Austenitic Stainless
Steel Sheet, Strip, Plate, and Flat Bar
ASTM A967
-
Chemical Passivation Treatments for Stainless Steel Parts
ASTM B16/B16M -
Rod, Bar, and Shapes for use in Screw Machines, Free Cutting Brass
ASTM B36/B36M -
Brass Plate, Sheet, Strip, and Rolled Bar
ASTM B103/B103M -
Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled
Bar
ASTM B122/B122M -
Plate, Sheet, Strip and Rolled Bar, Copper-Nickel-Tin Alloy, Copper-Nickel-
Zinc Alloy (Nickel Silver) and Copper Nickel Alloy
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business