MIL-DTL-83503C
NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)
NCSL-Z540.1 -
Calibration Laboratories and Measuring and Test Equipment, General
Requirements
(Copies of these documents are available online at https://www.ncsli.org or from the National Conference
of Standards Laboratories (NCSL), 2995 Wilderness Place, Suite 107, Boulder, CO 80301-5404.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AMS-QQ-N-290
-
Nickel Plating (Electrodeposited)
SAE-AMS-QQ-P-35
-
Passivation Treatments for Corrosion-Resistant Steel
SAE-AMS-P-81728
-
Plating, Tin-Lead (Electrodeposited)
SAE-AS81021
-
Copper-Beryllium Alloy, (Copper Alloy Numbers C17500 and C17510),
Strip
(Copies of these documents are available online at https://www.sae.org or from the Society of Automotive
Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO-10012-1
-
Equipment, Metrological Confirmation Systems for Measuring
(Copies of these documents are available online at https://www.iso.ch or from the International
Organization for Standardization American National Standards Institute, 11 West 42nd Street, 13th Floor,
New York, NY 10036.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet, the latter shall govern.
3.2 Qualification. Connectors furnished under this specification shall be products that are authorized by
the qualifying activity for listing on the applicable qualified products list before contract award (see 4.2 and
6.3).
3.3 Materials. Example reference materials are identified herein. When an example reference material
is not identified, a material shall be used which will enable the connectors to meet the performance
requirements of this specification. Acceptance or approval of a constituent material shall not be construed
as a guaranty of acceptance of the finished product.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business