MIL-PRF-39012/38J
TABLE I. Dash numbers, cross-reference, and dimensions Continued.
1/
For cross reference of dash number to superseded Part or Identifying Number (PIN) or type
designation, see table IV.
2/
The latest version of each cable shall be applicable.
3/
These connectors have captivated center contacts.
4/
These are not 50 ohm cables; therefore, when attached to the specified connectors, VSWR, RF
leakage and insertion loss are not applicable.
5/
Cable to be used when performing tests requiring cable except as in 4/ and 6/.
6/
Cable to be used for the +200°C temperature cycling tests.
7/
These connectors are assembled, using the applicable crimp tool, to the specified cable stripped as
shown on figures 3 and 4.
8/
M22520/5-35 closure A or M22520/5-55 closure A.
9/
M22520/5-61.
10/ Complete connector assembly shall consist of a body, center contact, ferrule, and assembly
instructions.
11/ Not to be used in Army equipment.
*
Dimensions are in inches. Metric equivalents are given for information only.
X
Denotes connector body plating material option. The only plating options allowable are Silver or
Nickel over brass in accordance with MIL-PRF-39012. Only connectors of the same materials shall
be mated to avoid dissimilar metal problems. CAUTION: A NICKEL PLATED BODY IS NOT FOR
USE IN APPLICATIONS WHERE PASSIVE INTERMODULATION GENERATION (PIM) MAY BE
A CONCERN (https://www.amphenolrf.com/simple/PIM%20Paper.pdf). Silver is the preferred
plating option.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business